CC26x0

Peripherals

name : AON_BATMON
description : Always On (AON) Battery And Temperature MONitor (BATMON) residing in the AON domain Note: This module only supports 32 bit Read/Write access from MCU.
base address : 0x0

name : AON_EVENT
description : This module configures the event fabric located in the AON domain. Note: This module is only supporting 32 bit ReadWrite access from MCU
base address : 0x0

name : AON_IOC
description : Always On (AON) IO Controller - controls IO operation when the MCU IO Controller (IOC) is powered off and resides in the AON domain. Note: This module only supports 32 bit Read/Write access from MCU.
base address : 0x0

name : AON_RTC
description : This component control the Real Time Clock residing in AON Note: This module is only supporting 32 bit ReadWrite access.
base address : 0x0

name : AON_SYSCTL
description : This component controls AON_SYSCTL, which is the device's system controller. Note: This module is only supporting 32 bit ReadWrite access from MCU
base address : 0x0

name : AON_WUC
description : This component control the Wakeup controller residing in the AON domain. Note: This module is only supporting 32 bit ReadWrite access from MCU
base address : 0x0

name : AUX_ADI4
description : Configuration registers controlling analog peripherals of AUX. Registers Fields should be considered static unless otherwise noted (as dynamic)
base address : 0x0

name : AUX_AIODIO0
description : AUX Analog/Digital Input Output Controller
base address : 0x0

name : AUX_AIODIO1
description : AUX Analog/Digital Input Output Controller
base address : 0x0

name : AUX_ANAIF
description : AUX Analog Peripheral Control Module
base address : 0x0

name : AUX_DDI0_OSC
description : This is the DDI for the digital block that controls all the analog clock oscillators (OSC_DIG) and performs qualification of the clocks generated.
base address : 0x0

name : AUX_EVCTL
description : AUX Event Controller
base address : 0x0

name : AUX_SCE
description : AUX Sensor Control Engine Control Module
base address : 0x0

name : AUX_SMPH
description : AUX Semaphore Controller
base address : 0x0

name : AUX_TDCIF
description : AUX Time To Digital Converter
base address : 0x0

name : AUX_TIMER
description : AUX Timer
base address : 0x0

name : AUX_WUC
description : AUX Wake-up controller
base address : 0x0

name : CCFG
description : Customer configuration area (CCFG)
base address : 0x0

name : CPU_TIPROP
description : Cortex-M's TI proprietary registers
base address : 0x0

name : CRYPTO
description : Crypto core with DMA capability and local key storage
base address : 0x0

name : EVENT
description : Event Fabric Component Definition
base address : 0x0
Interrupt (0) AON_GPIO_EDGE
Interrupt (4) I2C_IRQ
Interrupt (8) RFC_CPE_1
Interrupt (16) AON_RTC_COMB
Interrupt (20) UART0_COMB
Interrupt (24) AUX_SWEV0
Interrupt (28) SSI0_COMB
Interrupt (32) SSI1_COMB
Interrupt (36) RFC_CPE_0
Interrupt (40) RFC_HW_COMB
Interrupt (44) RFC_CMD_ACK
Interrupt (48) I2S_IRQ
Interrupt (52) AUX_SWEV1
Interrupt (56) WDT_IRQ
Interrupt (60) GPT0A
Interrupt (64) GPT0B
Interrupt (68) GPT1A
Interrupt (72) GPT1B
Interrupt (76) GPT2A
Interrupt (80) GPT2B
Interrupt (84) GPT3A
Interrupt (88) GPT3B
Interrupt (92) CRYPTO_RESULT_AVAIL_IRQ
Interrupt (96) DMA_DONE_COMB
Interrupt (100) DMA_ERR
Interrupt (104) FLASH
Interrupt (108) SWEV0
Interrupt (112) AUX_COMB
Interrupt (116) AON_PROG0
Interrupt (120) PROG0
Interrupt (124) AUX_COMPA
Interrupt (128) AUX_ADC_IRQ
Interrupt (132) TRNG_IRQ

name : FCFG1
description : Factory configuration area (FCFG1)
base address : 0x0

name : FLASH
description : Flash sub-system registers, includes the Flash Memory Controller (FMC), flash read path, and an integrated Efuse controller and EFUSEROM.
base address : 0x0

name : GPIO
description : MCU GPIO - I/F for controlling and reading IO status and IO event status
base address : 0x0

name : GPT0
description : General Purpose Timer.
base address : 0x0

name : GPT1
description : General Purpose Timer.
base address : 0x0

name : GPT2
description : General Purpose Timer.
base address : 0x0

name : GPT3
description : General Purpose Timer.
base address : 0x0

name : I2C0
description : I2CMaster/Slave Serial Controler
base address : 0x0

name : I2S0
description : I2S Audio DMA module supporting formats I2S, LJF, RJF and DSP
base address : 0x0

name : IOC
description : IO Controller (IOC) - configures all the DIOs and resides in the MCU domain.
base address : 0x0

name : PRCM
description : Power, Reset and Clock Management
base address : 0x0

name : RFC_DBELL
description : RF Core Doorbell
base address : 0x0

name : RFC_PWR
description : RF Core Power Management
base address : 0x0

name : RFC_RAT
description : RF Core Radio Timer
base address : 0x0

name : SMPH
description : MCU Semaphore Module This module provides 32 binary semaphores. The state of a binary semaphore is either taken or available. A semaphore does not implement any ownership attribute. Still, a semaphore can be used to handle mutual exclusion scenarios.
base address : 0x0

name : SSI0
description : Synchronous Serial Interface with master and slave capabilities
base address : 0x0

name : SSI1
description : Synchronous Serial Interface with master and slave capabilities
base address : 0x0

name : TRNG
description : True Random Number Generator
base address : 0x0

name : UART0
description : Universal Asynchronous Receiver/Transmitter (UART) interface
base address : 0x0

name : UDMA0
description : ARM Micro Direct Memory Access Controller
base address : 0x0

name : VIMS
description : Versatile Instruction Memory System Controls memory access to the Flash and encapsulates the following instruction memories: - Boot ROM - Cache / GPRAM
base address : 0x0

name : WDT
description : Watchdog Timer
base address : 0x0

Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by

Embeetle, an IDE designed from scratch for embedded software developers.

ChipSelect

CC26x0

Architecture

Peripherals